Heavy Duty Hydraulic Forging Press

Heavy Duty Hydraulic Forging Press
Heavy Duty Hydraulic Forging Press
Price And Quantity
  • Unit/Units
  • 1
  • Unit/Units
  • 800000 INR
    Product Specifications
    • Stainless Steel
    • Seal
    • Hydraulic Meganewton (MN)
    Product Description

    Having almost 2 decades of domain expertise, we are engaged in offering Heavy Duty Hydraulic Forging Press. It is manufactured by under the supervision of our experts utilizing optimum grade components with the help of modish techniques. The offered machine is used to form bushings, car wheels, gears, unions, elbows, etc. Further, this Heavy Duty Hydraulic Forging Press can be availed from us market leading rates within promised time span.


    • High performance
    • Low power consumption
    • Less maintenance
    • Longer service life

    Salient Features

    Fabricated ultrasonically tested steel construction of frame:Frame is fabricated from prime steel plates of proper thickness for greater strength rigidity. All home is designed an latest software's to resist any deflection & capable enough to withstand high pressure &vibration damping capabilities.

    Accurate slide Guiding Arrangement :
    Different kind of guiding arrangement are provided to suit the application of the press long guiding length &suitable guide with centralized lubrication systems provided in the presses.

    Most Reliable Hydraulic Drive System :SAHTEC hydraulic system is most reliable & the backbone of hydraulic presses. It involves a compact manifold Block ta avoid piping thus less chance of any leakages in the system so pressure will remain constant throughout the cycle. MI the valves are internationally reputed make, so reliability is more. High quality indigenously made precision hydraulic cylinders with low friction PTFE seals with 60%. Bronze guide top ensure operation & long life of the press.

    Mould opening with three steps of speed profile (Slow fast slow).

    Highly Sophisticated, intelligent control of the press functions by 0/ARON PC with following functions :

    • Mould library
    • Counter for production management
    • Alarm management
    • Inter lockings for safety

    Electronic Press Control:
    A powerful compact control for digital control over press functions. Simple user-friendly system with keypad on touch screen entry of control functions and setup parameters.

    With the base electronics press control you can:

    • Set digital top show, slow, down and bottom stop stroke position.
    • Set design pressure (Tonnage) set points.
    • Counters : Non resettable press stroke counter, resettable stroke counter.
    • Dwell timer, allows adjustable pressure dwells upto 10seconds.
    • Trend display for Tonnage and Reversal Position.
    • Cycle rate displayed in cycles per minute.

    Diagnostic capability : ALL PLC I/O points can be monitored on the screen.

    Slide Mounted Knockout Cylinders :
    Powerful Four (4) 3.25" Bore, 2.0" Rod, 5.0" Stroke cylinders capable of a combined tonnage of 20 tons in the slide of the press. Cylinders will be approximately 12" apart center to center in the front to back direction and approximately 36" apart in the left to right direction. Cylinders will actuate when slide reaches of stroke so as keep the frimmed forging in the lower die when the slide retracts. Cylinders will need to extand at the same speed as the main slide return speed. Cylinders will retract upon reaching the top setting for the slide.

    Hydraulic Oil : Flame retardant oil will be used in this press. All seals should be viton where possible.
    Note : Press will be subjected to a full wash down approximately weekly. Provisions taken to prevent a high- pressure washer from spraying into any electrical boxes or connections. All wiring will be set up to enter Electrical Enclosures or junction boxes from beneath and all Solenoid connectors to be NEMA 12 with Silicon sealant.

    Cooling Plan: Provide an Upper Cooling Plan. Cooling Platen to be 60"x40"x5" thick. Cooling channels will be provided in the platen. Cooling platen will help to reduce the amount of heat buildup in the trim tooling from trimming hot forgings.


    Adjustable from 160 to 800 maximum

    Bed Bolster

    60"L-R x 40" F-B

    Slide Bolster

    56" L-R x 36" F-B

    Open Height (daylight)


    Closed Height



    Adjustable to 30"

    Pass through width


    Window Size


    Floor to table


    Cylinder bore diameter (Main Cylinder Qty 1)


    Ram Diameter


    Cylinder bore diameter (Jack Cylinder-Qty 1)


    Ram diameter



    75 GPM

    Hydraulic System

    Jack Cylinder Controlled Pre-Fill

    Ram Speed : Close, Inches per minute


    Ram Speed : Press, Inches per minute


    Pressing speed at 1751PM is only for upto a 4" long stroke. Anything longer and the press would then be pumping 75GPM for a pressing speed of 331PM

    Ram speed : Open, Inches per minute


    Maximum System Pressure (PSI)


    Motor H.P.


    Overall Size

    148"L-Rx98" F-Bx315" High



    Trade Information
    • Cheque, Cash in Advance (CID), Cash Advance (CA)
    • 1 Per Month
    • 2 Months
    • Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
    • All India
    Related Products
    4-Nos Hard Chrome Pillars Type Presses

    Send Inquiry
    C Frame Press - Upto Hcp-40

    Send Inquiry
    Angular Frame Hydraulic Press

    Send Inquiry
    C Frame Type Power Press

    Send Inquiry
    Hydraulic Cutting Press

    Send Inquiry
    Hydraulic Trim Press

    Send Inquiry
    right arrow
    left arrow
    Contact Us

    Plot No. 92/6, Road No-1, Mundka Udyog Nagar, Mundka Extension, Rohtak Road,, New Delhi, Delhi, 110041, India
    Phone :+918037400147