Transfer Molding Press Manufacturer,Supplier,Exporter

Transfer Molding Press

We are glad to introduce ourselves as the market leading manufacturers, suppliers and exporters of Transfer Molding Press. This press is applicable for low to medium volume production with middle range dimensional tolerances. Offered press is thus used for electrical parts switch gears, DMC and rubber parts. Moreover, for our manufactured Transfer Molding Press, we have loads of satisfied clients worldwide. Furthermore, buying this press from us, ensures flawless performance, life long.

Application:

Mid range dimensional tolerances
Low to medium volume production
Small to medium sized parts
Delicately shaped parts
Low to medium durometer materials
Insert molding
Colored and translucent compounds.

Salient Features :

Santec Transfer Molding Press offers the following advantages over compression moulding presses :

As the mould is closed before the rubber charge is forced into it, closer dimensional control can be achieved
Fresh rubber surface are produced in the transfer process, allowing for development of strong rubber – metal bond with any insert in the mould
Unit production costs are lower due to shorter cure times as a result of heating the rubber due to flow through sprue, runner and gates & shorter downtime between runs, as only one charge blank is necessary, even if a multi cavity mould is used
Provides benefits of fast molding set and product consistency or uniformity
Low operating cost in comparison to injection molding machines
Touch Panel Screen (MMI) for user-friendly operation
Product quality is equivalent to injection moulded parts
Fast production & better product quality in comparison of compression molding presses
Low maintenance cost

Technical Specifications :

	Description	Models
	Description	TMP-10	TMP-25	TMP-50	TMP-75	TMP-100	TMP-150	TMP-200	TMP-250	TMP-300
Material Transfer Unit	Max. transfer pressure (Bar)	210	210	210	210	210	210	210	210	210
	Transfer cylinder capacity (Tons)	5	12	20	25	30	40	60	60	100
	Movement of Transfer Cylinder	Downstroking	Downstroking	Downstroking	Downstroking	Downstroking	Downstroking	Downstroking	Downstroking	Downstroking
	Stroke length (Inch)	8''	8''	10''	12''	12''	14''	14''	14''	16''
	Bore size of the cylinder	63	100	120	125	130	150	200	200	250
Mould Clamping Unit	Clamping force (Tons)	10	25	50	75	100	150	200	250	300
	Stroke length (mm)	350	400	450	500	500	600	600	800	800
	Platen/bed size (mm)	12''x12''	14''x14''	16''x16''	18''x18''	20''x20''	22''x22''	24''x24''	28''x28''	36''x36''
	Maximum day light (mm)	350	400	450	500	500	600	600	800	800
	Cylinder bore size (mm)	100	125	200	220	250	300	350	400	450
General	Diameter of tie bars (4 nos)	36mm	50mm	70mm	90mm	120mm	130mm	140mm	150mm	150mm
	Heating capacity/platen	3kw	3kw	4.5kw	6kw	6kw	6kw	9kw	9kw	12kw
	Electric motor	3 H.P.	5 H.P.	7.5 H.P.	7.5 H.P.	10 H.P.	15 H.P.	15 H.P.	20 H.P.	25 H.P.
	Operation	PLC Controlled	PLC Controlled	PLC Controlled	PLC Controlled	PLC Controlled	PLC Controlled	PLC Controlled	PLC Controlled	PLC Controlled
	Movement of clamping cylinder	Up Stroking	Up Stroking	Up Stroking	Up Stroking	Up Stroking	Up Stroking	Up Stroking	Up Stroking	Up Stroking
	Core Pullers	2 Nos.	2 Nos.	2 Nos.	2 Nos.	2 Nos.	2 Nos.	2 Nos.	2 Nos.	2 Nos.
	T-Slots	T-16	T-16	T-20	T-22	T-22	T-22	T-22	T-24	T-24
	No. of Clamping Cylinders	1 No. Double Acting	1 No. Double Acting	1 No. Main+2 Jacking	1 No. Main+2 Jacking	1 No. Main+2 Jacking	1 No. Main+2 Jacking	1 No. Main+2 Jacking	1 No. Main+2 Jacking	1 No. Main+2 Jacking
	Weight of the Press (Tons)	5	6	7	8	8-9	10-11	14	16	18

Clamping capacity : 10 tons to 500 tons
Transfer cylinder capacity : 4 tons to 200 tons
Platen sizes : 8 sq. Inch to 48 sq. Inch
Heating : electrical
Operation : Both PLC with display controlled & relay / contractor based.

Go to the Desktop Website